cnc-machining-service-hero
Custom CNC Machining Services

16 years of expertise driven by agile Starfish teams and digital management, delivering precision parts on time. Upload your 3D CAD today for an instant quote and a Free Expert DFM Analysis by our Engineering Team.

Send Inquiry Now

 

ISO 9001:2015| IATF 16949:2016| SGS |ROSH

 

our Partners

Over the years, we have built long-term relationships with engineering teams and companies in different industries and markets. Many customers continue working with us because of stable part quality, dependable delivery, and CNC machined parts that arrive ready for assembly.

We trusted by

modular-1
modular-2
modular-3
modular-4
modular-5
modular-6
 
 
 
 
 

 

Core CNC Machining Capabilities

 

We execute complex geometries, transitioning from rapid prototyping to high-volume mass production.

cnc milling

CNC Milling

3-axis, 4-axis, and 5-axis simultaneous machining setups.

Send Inquiry Now

cnc turning

CNC Turning

Precision turning and mill-turn operations.                                                      Send Inquiry Now

Surface Finish capability

Surface Finish Capability

Electroplating, anodizing, painting, and other surface treatments

Send Inquiry Now

 

Material Options for CNC Machining Services

 

We machine a wide range of metals and engineering plastics for CNC machining projects, covering prototypes, low-volume orders, and production parts.

 

After machining, parts can be supplied with anodizing, hard anodizing, electroless nickel plating, zinc plating, passivation, black oxide, powder coating, painting, polishing, brushing, bead blasting, or other specified finishes.

 

If your drawing calls for a less common alloy or plastic grade, our purchasing team can source it through our qualified material suppliers rather than limiting the project to standard stock.

 Material grade, heat treatment condition, hardness, finish, and coating thickness can all be produced according to the specifications shown on your drawing.

Aluinium Alloys

Aluminum Alloys

1060/2017/5052/5083/6061/6063/6082/7075

Stainless Steel carbon steel

Stainless Steel & carbon steel

304/316L/416/420/17-4PH/4130 / 4140 / C45 / S45C / Q235 / Q345

Titanium Brass

Titanium & Brass

Grade 2/Grade5/TC4/

C17200/C3600/C101/C102/C110

Engineering plastic

Engineering Plastics

PEEK/POM (Delrin)/PA/ABS/PC/

PTFE/PE

cnc machining factory
 
 

China Online Custom CNC Machining Services

 

Our 3-axis to 5-axis CNC milling services turn your designs into precision parts, from simple components to complex geometries. For straightforward features, 3-axis machining offers a cost-effective option, while 3+2-axis machining allows access to multiple faces with fewer setups. Simultaneous 5-axis milling handles complex contours and angled features. From prototypes to production runs, we select the machining approach to suit your geometry, tolerances, and budget.

 
150

equipment

 
15+

years experience

 
0

Minimum Order Quantities

 
2H


Quick Quote

 

 

 

 

The HERON Engineering Advantage

 

Engineer Support

Engineer Support

Work directly with our Engineering Team on drawings, tolerances, materials, and other details for custom CNC machining projects.

Free Expert DFM Analysis

Free Expert DFM Analysis

Our engineers review your CAD files for tolerances, tool access, setups, and difficult features before CNC machining begins.

Digital Production

Digital Production 

Track production progress, inspection records, and key job information clearly throughout your custom CNC machining order at HERON. 

Direct Factory Cost

Direct Factory Cost

As a CNC machining manufacturer in China, we handle machining and inspection in-house, helping keep pricing competitive and production stable.

 

modular-1
CNC Machining Service from Prototype to Production

HERON provides CNC machining support from prototype development to production runs, helping you move from initial testing to finished parts with one manufacturing partner.

 

why choose us
 

We catch and fix problems on your drawings before we even start, so you get a solid finished part without wasting time or money.

Why Buyers Choose Our CNC Machining Service

Why Buyers Choose Our CNC Machining Service

 

A route matched to the part: We review the working geometry before deciding which features belong on a mill, a lathe or both. The quotation identifies the operations included.

Drawings or samples: A 3D model and controlled drawing are ideal. A sample can start the discussion when an old part needs replacing, provided its material and original fits are checked.

Material and finish in the same conversation: Aluminum, steel and engineering plastics appear in our CNC range. Tell us the grade, stock form and any faces that must stay free of coating.

A clear handoff to repeat orders: Agree on the drawing revision, fit-critical dimensions and requested inspection records for the approved part before placing a repeat order.

Heron-Alu Quality Inspection
 

Your parts are inspected against approved drawings using CMMs, vision measuring systems, height gauges, micrometers, thread gauges, and coating thickness gauges. First-piece, in-process, and final inspections cover critical dimensions, geometric tolerances, and surface requirements. Controlled drawing revisions and material and batch records support traceability, while inspection reports, material certificates, and PPAP documentation—including control plans, PFMEA, MSA, and Cpk data—can be prepared according to your project requirements.

Heron-Alu Quality Inspection
 

 

CNC Machining Tolerances & Specifications

 

Feature Description
Maximum Part Size Milling: up to 2,032 × 1,219 × 610 mm (80 × 48 × 24 in). Turning: up to 1,575 mm (62 in) in length and 813 mm (32 in) in diameter.
Standard Lead Time Typically 3–7 business days, depending on part complexity, quantity, material availability, and finishing requirements.
General Tolerances Unless otherwise agreed, general tolerances are ±0.127 mm (±0.005 in) for metals and ±0.254 mm (±0.010 in) for plastics and composites.
Precision Tolerances Tolerances tighter than ±0.0254 mm (±0.001 in) can be reviewed against your drawings and GD&T requirements. Feasibility depends on the material, geometry, and inspection method.
Minimum Feature Size Features as small as 0.50 mm (0.020 in), subject to part geometry, material, and tool access.
Threads & Tapped Holes Standard metric and imperial threads are supported. Custom threads are reviewed individually for machining feasibility and quotation.
Edge Condition Parts are deburred, and sharp edges are broken unless your drawing specifies otherwise.
Surface Finish Standard as-machined finish: Ra 3.2 μm (125 μin) or better. Additional surface treatments can be specified when requesting a quote.

 

Surface Finishing for Custom CNC Machining Parts

 

Choose the right surface finish for your parts’ appearance, corrosion resistance, and wear requirements. We help you select a suitable treatment based on your material, application, tolerances, and budget.

 

productcate-2020-778

 

• Color Anodizing • Black Anodizing • Hard Anodizing • Bead Blasting + Anodizing
• Chrome Plating • Zinc Plating with Blue Passivation • Nickel Plating • PVD Coating
• E-Coating • Stainless Steel Passivation • Black Oxide • As-Machined Finish
• Bead Blasting • Brushing • Polishing • Powder Coating
• Spray Painting • Water Transfer Printing • Laser Engraving • Screen Printing

Project Case: Six-Sided Precision Mounting Base

This mounting base has six machined faces, with mounting and locating holes in different directions. Its purpose is to establish an accurate position for the parts attached to it. The drawing therefore needs more than acceptable edge lengths and hole diameters. The mounting face must sit flat, adjacent faces must stand square to the selected datum, and the hole pattern must locate correctly from the assembly references. A CNC machining service for this part has to plan those relationships across several setups.

Repeated flipping is the main process difficulty. A burr or chip on a locating face can tilt the base in the fixture. Switching to a different reference after each flip can shift a hole pattern even if every individual hole diameter passes. The planned datum system uses primary plane A, secondary plane B and tertiary feature C. Rough machining leaves finishing allowance. A, B and C are then finished to give later operations a stable reference. A fixture locating from that system is used for the remaining faces; related surfaces and holes are grouped in one setup where access permits. Before each move, the locating faces are cleaned, burrs are checked and the work offset is verified.

Final inspection establishes the same A/B/C system shown on the drawing. A coordinate measuring machine can check hole true position and the perpendicularity of the relevant faces. The mounting plane's flatness is evaluated across its functional area; measuring only four corners could miss a local high point. The inspection plan follows the customer's specified limits and drawing revision.

Customer's technical requirement

Process response

Verification

Flat mounting face

Finish datum A with even support, then protect it during later setups.

Assess flatness across the complete functional face.

Perpendicular adjacent faces

Locate each flip from the finished A/B references, rather than an unfinished edge.

Check perpendicularity to the drawing datum.

Locating-hole position

Keep related holes in one setup where possible; recheck offsets after moving the part.

Measure true position from A/B/C on the finished component.

First 123456 Last 1/6
modular-1
Reading a Custom CNC Machining Quotation

Compare offers against the same drawing revision, stock source, secondary operations, finish, reports, packing and freight. A proposal to alter a feature needs engineering approval before an order is placed. Send the current files through Heron-Alu's contact page, and raise confidentiality requirements before transmitting controlled drawings.

FAQ

Q: Can I request CNC machining services with only a sample?

A: Send clear photographs and the sample information you have. A sample can show shape, but it may be worn or altered by use, and it may not identify the original material or tolerance. Explain how the part fits into its assembly. We can then identify the measurements and drawing decisions needed before a replacement part can be priced.

Q: What is the minimum order for CNC machined parts?

A: The current site presents prototype work, including single-piece inquiries. Whether a particular part can be supplied as one piece depends on stock, setup, machining access and finishing. Send the drawing and desired quantity. The quotation will state the scope and price for that request; a later repeat order can be discussed separately after the sample has been checked.

Q: Which tolerances can this CNC machining service hold?

A: Tolerance depends on the feature, material, size, holding method, process and measurement access. A small bore in a short sleeve presents a different problem from flatness across a wide plate. Mark the critical values on the current drawing and describe their function. We will review those callouts for the proposed route rather than applying one number to every surface.

Q: Can machining and finishing be included in one quote?

A: Include the finish, color or texture you want, along with any masking area and dimensions that must be checked after treatment. A visible enclosure and an unseen bracket may need different appearance criteria. The quotation should make clear which operations are included and whether an approved finish sample or extra handling requirement is needed for the order.

Q: What files help you quote a custom CNC machined part?

A: A 3D model and a current 2D drawing work well together. The model shows the form; the drawing records tolerances, datums, threads, finish and revision. Add the material grade, quantity and delivery address. If you have only a sketch or sample, send it and explain what is still undecided. We can tell you what information is missing for a useful quote.

Q: Can Heron-Alu make parts that need both milling and turning?

A: The Heron-Alu site lists both processes and shows mixed-feature products. Send the complete part drawing, including flats, cross holes or slots added to a round body. Those features may require another setup and their position may need to be measured against the turned axis. We will assess the combined route for the part shown, not only its cylindrical profile.

 

 

 

We're professional CNC machining manufacturers and suppliers in China, specialized in providing high quality custom service. We warmly welcome you to wholesale cheap CNC machining from our factory.

(0/10)

clearall