Plastic Injection Molding

Precisionplastic Injection Moulding Part
Plastic injection moulding is perfect for very intricate parts. Compared to other techniques, moulding allows you to incorporate more features at very small tolerances. You can hold this moulding in the palm of your hand and it has bosses, ribs, metal inserts, side cores and holes made with a sliding shut off feature in the tool. That's an awful lot of features on a small part! It would be impractical to make using plastic fabrication and impossible to make using the vacuum forming process.

High Repeatability
Once your mould tool is made, identical products can be made over and over again. And again. A decently made mould tool has a very long mould tool life, as long as it's treated well by the moulding machine setters !

Low Cost Per Part
Whilst there is an initial high investment for the plastic injection moulding tool, after that the cost per part is very low. Other plastic processing techniques may require multiple operations, like polishing, whilst injection moulding can do it all at once. If you chose to CNC machine the part above, it would cost hundreds of pounds per part. If you're looking to go into full production, injection moulding is the way to go.

Fast
Cycle times can be as low as 10 seconds. Combine that with a multi-impression injection moulding tool and you get a LOT of products very quickly. That part above takes a bit longer as it's a specialist material and has a lot of features to be moulded correctly, but at about 50 seconds you'd still get 70 parts per cavity per hour. CNC machining a one-off would take half a day - 3D printing it even longer!

Material Choice
There's a vast amount of materials available for plastic injection moulding. A range of more common materials, but also things like antistatic plastic, thermoplastic rubber, chemical resistant plastics, infrared, biocompostable...and with colour compounding or masterbatch colouring you have an endless choice of colours as well. The moulding above is boring black, but it's made out of PPO - poly(phenylene oxide) - which is an extremely rigid and flame-retardant material.

Special Surface Finishes, Engraving & Printing
In addition to a range of colours, the injection moulding tool can be made with a special finish which will show on the moulding. Just about any finish you like, for example leather look, soft touch, sparked, high shine, you name it. You can also have logos or other text engraved in the tool. Finally, you can have your mouldings printed, as a range of inks are available that will print well on plastic.

Little Plastic Waste
Part repeatability is very high for injection moulding. Even the sprues and runners (the leftover bits of plastic created by the 'tunnels' through which the plastic material reaches the actual mould) can be reground and the material reused. You can explore this in more detail on our environmental impact of injection moulding page.