Capabilities

Home / Capabilities/ CNC Machining / CNC Turning

Lathe Turning Services

High precision I fast delivery I complex structure
Outer diameter tolerance ±0.005mm, runout ≤ 0.01mm, surface roughness up to Ra 0.2μm;
Equipped with three-coordinate, roundness tester, roughness tester, go/no-go gauge and other testing equipment, full-size testing

Send Inquiry

Product Introduction

We are a manufacturing company specializing in CNC parts processing, and have long provided high-quality, customized lathe turning services to global customers. With high-end equipment and an experienced engineering team, we are able to stably process a variety of metal and plastic materials to meet different needs from single-piece proofing to mass delivery.

lathe turning services factory

Our lathe turning services cover multiple industries such as automation accessories, connecting sleeves, medical transfer parts, robot parts, communication structural parts, etc., and also support CNC turning machining, custom lathe parts, metal turning components and other related processing content.

Processing case: high-precision stainless steel sleeves
The customer commissioned us to produce a batch of high-precision sleeves for optical equipment, with the following requirements:

Material: SUS 303

Outer diameter: φ22mm, inner hole: φ16mm, length: 40mm

Tolerance requirements: inner hole H7, outer diameter ±0.005mm

Special requirements: end face runout ≤ 0.01mm, surface Ra ≤ 0.4μm

Difficulties and challenges

The workpiece size is short, and the risk of clamping deformation during processing is high;

The coaxial accuracy of the inside and outside must be guaranteed, and the runout at both ends must be strictly controlled;

High surface requirements, must be suitable for direct assembly.

Application Areas

Testing equipment

Our solution

Use a special elastic chuck in combination with a soft jaw to ensure that there is no indentation when clamping;

Use a high-precision lathe for three-stage processing paths of roughing-finishing-polishing;

Use an ultra-precision polishing tool to complete the smooth processing after fine processing, and manually detect the runout value of each product;

Use three-coordinate + internal diameter gauge + finish meter multi-channel inspection throughout the process to ensure that each product meets customer needs.

This batch of products was delivered with zero defects after processing, and customers repurchased for a long time, and the two parties established a stable cooperative relationship.

We not only provide lathe turning services, but also customize various high-precision CNC turning parts, which are suitable for various high-demand industrial scenarios.

lathe turning services Quality Control Process

Engineer Team

FAQ

Q: What is the minimum size that your lathe turning services can process?

A: We can process turning parts with a minimum diameter of φ1.0mm and a maximum of φ250mm, with a length range from 3mm to 500mm.

Q: Does it support composite structures such as internal hole tapping, slots, and end face processing?

A: Yes. We have lathe-milling capabilities, and can complete multiple machining surfaces in one clamping to ensure structural consistency.

Q: What materials can you process?

A: Including but not limited to aluminum alloy (6061, 7075), stainless steel (303, 304, 316), brass, titanium alloy, POM, PEEK and other materials.

We focus on high-precision, high-efficiency and high-reliability lathe turning services, providing customers with complete solutions from sample development to mass production. Welcome global customers to consult and cooperate!

lathe turning services Business Team